Garage door safety inspection and testing in Brampton
Does your garage door close too hard, or have you never checked whether it reverses? We test the safety sensors, the auto-reverse and the closing force on garage doors and gates, adjust what we can, and explain what we found.
The price is agreed before we start. If we find something unexpected, we stop and show you first.
Prefer a call? (647) 669-7346
- 5.0 on Google, from 34 reviews
- Since 2005 ยท 21 years
- Fully insured

What is the door doing?
Choose the one closest to your situation.
The auto-reverse or force setting may be off. We test it with an object under the door and adjust the opener so it backs up as it should.
Blinking sensor lights usually mean the photo eyes are dirty or out of line. We clean and align them, then test again.
The travel limits may be set wrong or the door may be out of balance. We adjust the opener and tell you if the springs need attention.
Tell us what you see or hear. Write it in the booking form or message us on WhatsApp, and we'll tell you what it is.
What this service includes
- Test the auto-reverseWe check that the door backs up when it meets an object.
- Check the photo eyesWe clean and align the safety sensors and test that they stop the door.
- Adjust force and limitsThe opener's closing force and travel are set to suit your door.
- Inspect the moving partsWe look at rollers, hinges, cables and springs and note any wear.
- Go over the resultsWe show you what passed, what we adjusted and what needs more work.
Quoted separately, only if you need it
Spring, cable or opener replacement, new sensor wiring and gate motor repairs are quoted separately or left to a garage door technician, only if you need them.
How to check your garage door's safety features
A garage door is the largest moving object in most homes, and many weigh more than 100 kilograms. Openers have two safety systems: photo eyes near the floor that stop the door when something crosses the beam, and an auto-reverse that backs the door up if it touches something. Both can drift out of adjustment without you noticing.
Signs it needs testing
- The door doesn't reverse when something passes through the sensor beam.
- The sensor lights blink or one of them is off.
- The door slams or bounces at the floor.
- It moves unevenly or one side sits lower.
- Children or pets use the garage often.
What we test and adjust
We check the sensors, the auto-reverse with an object under the door, the closing force and the balance of the door. Simple adjustments are made on the spot. Springs and cables hold a lot of tension and should only be handled by a garage door technician, so if they look worn we tell you and leave them alone. Gates with motors get the same sensor and reversal checks.
Service details
- Time on site
- 30 minutes to 2 hours
- Technical visit
- Recommended. We check the job and the access first.
- Materials
- Small parts like sensor brackets are agreed with you before we install them.
- Warranty
- 2 years on our work
- Area
- Brampton and the GTA
What happens after you book
You don't need an app or an account. Someone from our team contacts you to confirm.
You choose a day
Online in a few minutes, on WhatsApp or by phone.
We contact you to confirm
Usually within two business hours.
The technician checks and gives you the price
Nothing starts until you say yes.
The work is done and tested
Tested with you. Our work has a 2-year warranty.
What our clients say
Excellent work, friendly staff, respectful. If you want a job done right at a fair price, this is the company to call!
Sandra L.Home maintenance Great organization to work with, very good communication and clarity on the work to be performed. Very happy with the work done.
Chito W.Home repairs
Questions about garage door safety testing
How do I test my garage door's auto-reverse?
Lay a piece of wood or a roll of paper towels under the door and close it. The door should touch it and back up. If it doesn't, keep people and pets clear and contact us.
Why won't my garage door close all the way?
Most often the photo eyes are blocked, dirty or out of line. We clean and realign them during the test.
Do you adjust or replace garage door springs?
No. Springs hold a lot of tension and need a garage door technician. We tell you if they look worn.
How often should the safety features be tested?
Many opener manuals suggest a quick monthly check by the homeowner and a full inspection about once a year.
Do you check automatic gates?
Yes, we test gate photo eyes and the reversal function. Gate motor repairs are quoted separately.
We test garage door safety across Brampton and the GTA
Other doors, windows & locks services
See allNeed it fixed soon?
Message us on WhatsApp and we will find you the earliest available day.



