Epoxy floor coating
Detailed Description
An Epoxy Floor Coating in Your Toronto & GTA Garage or Basement Is Only as Good as the Preparation Underneath It
Epoxy floor coatings transform bare concrete floors — Toronto & GTA garage floors with oil stains and salt damage, basement floors that look raw and utilitarian, utility rooms that need a durable, cleanable surface. But epoxy is also the coating that fails most visibly when surface preparation isn’t done properly. Peeling, bubbling, and delamination in epoxy-coated floors in Toronto & GTA homes are almost always adhesion failures caused by inadequate prep — surface contamination, moisture in the slab, or insufficient profile for the coating to bond to. The application itself is straightforward. The preparation is where the result is determined.
At CNG Contracting, epoxy floor coating in Toronto & GTA begins with the preparation that makes it last. Grinding or acid etching to create a proper surface profile. Moisture testing — essential in Toronto & GTA garages and basements where concrete moisture can be elevated seasonally. Crack and spall repair before coating. And a product selection appropriate for the traffic and use conditions of the specific floor in your Toronto & GTA home.
What Proper Epoxy Floor Preparation Involves in Toronto & GTA
- Oil and Contaminant Removal: Garage floors in Toronto & GTA homes typically have years of oil and automotive fluid penetration — these must be addressed before any coating will adhere properly.
- Surface Profile Creation: Acid etching or diamond grinding creates the mechanical profile that epoxy bonds to — smooth concrete that looks clean isn’t prepared for epoxy adhesion.
- Moisture Testing: Toronto & GTA concrete floors — particularly garages with grade-adjacent slabs — can have elevated moisture that causes epoxy to delaminate. We test before applying.
- Crack and Spall Repair: Existing cracks and surface spalling are addressed before coating — coating over unrepaired damage doesn’t hide it for long.
Why Toronto & GTA Homeowners Apply Epoxy Coatings
- Garage floors that are oil-stained, grey, and difficult to clean — transformed to a durable, wipeable surface
- Basement utility floors that need to be functional and easy to maintain
- Home workshop and hobby room floors where durability and cleanability matter
- Pre-sale upgrades in Toronto & GTA homes where garage presentation affects buyer impression
Epoxy floor coating done properly in your Toronto & GTA home lasts for years and makes the space genuinely more functional every day. Book your assessment today.
Service Details
| Includes | Moisture testing, surface prep, crack repair, primer, epoxy application, decorative flake if desired |
| Time on site | 1 to 2 days depending on floor area (prep and coating are separate stages) |
| Cure time | Light use after 24 hours, vehicle traffic after 72 hours |
| Warranty | 2 years on workmanship |
| Licensed & insured | Yes |
| Service area | Toronto & GTA and surrounding GTA |
Frequently Asked — Epoxy Floor Coating in Toronto & GTA
How long does epoxy floor coating last in a Toronto & GTA garage?
Professionally applied epoxy with proper surface preparation and a top coat sealer lasts 5–10 years in most Toronto & GTA garage applications. High-traffic areas may show wear sooner. The primary failure mode is not product deterioration but adhesion failure from inadequate prep — which is why preparation is the critical step.
Can epoxy be applied over existing painted concrete in my Toronto & GTA home?
Not reliably. Existing paint must be completely removed before epoxy application — epoxy will delaminate with the existing coating if applied over it. We assess the floor condition and advise on the preparation required for your Toronto & GTA property.
How do I book epoxy floor coating in Toronto & GTA?
Book online in under two minutes. Our Toronto & GTA team contacts you directly to confirm floor details and schedule your visit.
Epoxy floor coating in Toronto & GTA garages also includes a discussion of slip resistance — decorative flake broadcast into wet epoxy provides both colour variation and additional grip on a surface that can become slippery when wet from tracked-in Toronto & GTA rain or snowmelt.
Why is a Technical Visit necessary?
The #1 cause of epoxy failure (peeling or bubbling) is improper surface preparation. You cannot simply wash the floor and paint it. Our Epoxy Floor Coating assessment checks the concrete's hardness and moisture content. We identify oil spots that need chemical degreasing and determine the level of diamond grinding required to "open the pores" of the concrete, ensuring the epoxy mechanically bonds to the slab forever.
SCHEDULE AN INSPECTION
Request your technical visit.
Tell us what you need and a certified specialist will visit you to evaluate your project and give you a real quote the same day.
WHY DO I NEED A TECHNICAL VISIT?
-
1Real diagnosis in your home. A technician evaluates materials, measurements, access, and local regulations.
-
2The visit cost is discounted from the project. The fee is fully credited to your final invoice once you approve the quote.
-
3No commitment if you don’t approve the quote. If you don’t accept the quote after the visit, there is no obligation to proceed.
- Certified technicians — licensed & insured
- Real quote — same day as the visit
- No surprises — no hidden costs
Talk to an expert
Within 2 hours for quotes
